K&M - Controlled Depth Reamer Alliant Optimal ergonomics

Optimal ergonomics

#14040 cutter will interchange with RCBS

C4 Carbon Remover’s proprietary formulation utilizes a sophisticated blend of surfactants

•When your tool is in storage wipe a light oil on the tool steel shaft

K&M - Controlled Depth Reamer Alliant Optimal ergonomicsThe K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even